hey guys !
i really need the help of someone out there !
i moddelled an mark VII helmet as some of you knows .
anyway helagak wants to 3d print it but i have some issues
i have some open edges in the geometry and that causes distortion in my model when i put the shell modifier
if someone could help me it would be really apreciated and i will share the model with him under certain condition
my model
![Click image for larger version.
Name: ajbhdfghkbasjg.PNG
Views: 25
Size: 72.3 KB
ID: 184964]()
distortion caused by the shell mod
![Click image for larger version.
Name: jadhsfjldhsfjkla.PNG
Views: 29
Size: 17.3 KB
ID: 184965]()
![Click image for larger version.
Name: adsghbsdjkfbajs.PNG
Views: 23
Size: 85.9 KB
ID: 184966]()
i tried to check : straighten corners but this is what it look like
![Click image for larger version.
Name: kjsglksfdglkjs.PNG
Views: 28
Size: 34.2 KB
ID: 184969]()
i would really appreciate your help !
i really need the help of someone out there !
i moddelled an mark VII helmet as some of you knows .
anyway helagak wants to 3d print it but i have some issues
i have some open edges in the geometry and that causes distortion in my model when i put the shell modifier
if someone could help me it would be really apreciated and i will share the model with him under certain condition
my model
distortion caused by the shell mod
i tried to check : straighten corners but this is what it look like
i would really appreciate your help !
