So here are my plan choices. Trying to get a feel for what would be best, as I'm only getting one shot at this. The pep build for this particular helmet was awful. Too many small bits.
Without further dudes, here are my choices:
A) Spray the inside with tack glue, and lay out all my fiberglass strips. Pour resin in, and do it area by area. (This is how I normally do my fiberglass work)
B) Rondo in, no fiberglass cloth.
C) Same as A), but instead of pouring resin, I pour in Rondo.
D) Pour Rondo in, press fiberglass into the rondo.
Without further dudes, here are my choices:
A) Spray the inside with tack glue, and lay out all my fiberglass strips. Pour resin in, and do it area by area. (This is how I normally do my fiberglass work)
B) Rondo in, no fiberglass cloth.
C) Same as A), but instead of pouring resin, I pour in Rondo.
D) Pour Rondo in, press fiberglass into the rondo.